Guide · Ship manoeuvring

Ship manoeuvrability: turning space and stopping distance

Updated 2026-10-11 · About 7 min read

In one sentence

Assess turning space and stopping distance from the ship’s manoeuvring information and test conditions; recommended criterion limits are not actual ship values.

Engine, propeller and rudder: check the ship’s arrangement

To assess propulsion and turning capability, consult the ship’s manoeuvring information and equipment instructions; an explanation of one arrangement cannot be applied to every vessel. The manufacturer’s CPP description reviewed supports forward and backward operation without changing engine rotation direction; check equipment documents for the actual ship’s control method.[S3][S4][B1][B5]

Definitions of advance, transfer and tactical diameter

In MSC.137(76), L is length between the forward and aft perpendiculars, with the midship point used for measurement. Advance is the midship-point displacement along the original course from the rudder order to a 90° heading change; transfer in the ITTC test procedure is the midship-point displacement perpendicular to the original course at that same point.[S1][S2][B2]

Tactical diameter is the midship-point displacement perpendicular to the original course from the rudder order to a 180° heading change, rather than the distance travelled around a complete circle. Recommended limits are advance no greater than 4.5L and tactical diameter no greater than 5L; these are test-criterion limits, not measured values for the ship.[S1][B1][B2]

Stopping track reach and recommended test standards

Track reach in the full-astern stopping test is the distance along the actual midship-point track until stopped in the water, rather than a projection along the original course. MSC.137(76) recommends no more than 15L; where large displacement makes this impracticable, the Administration may modify the limit, but not beyond 20L. The ship cannot select the relaxation unilaterally.[S1][B2][B3]

The IMO standard is recommendatory and applies to ships of 100 metres or more and chemical tankers and gas carriers of any length, excluding the specified high-speed craft; check statutory or class adoption separately. Conditions include deep unrestricted water, a calm environment and full load on even keel. Test limits are not predictions of stopping distance on site.[S1][B2][B3]

Limits of information for low speed, astern operation and tug assistance

For low-speed or astern operation, consult the ship’s test data, manoeuvring information and relevant equipment documents for values and characteristics. Bollard pull is a static pulling measure at zero speed through the water under specified conditions; check the particular tug’s test certificate and applicable conditions. This page gives no universal tug-capacity prescription.[S3][S5][S6][B2][B4]

Check values against the ship’s test and manoeuvring information

Manoeuvring information under A.601(15) describes the ship’s performance and test conditions; environment, hull and loading can make actual performance differ from displayed information. Check the length basis, loading condition, test conditions and midship-point definitions before applying the information under ship procedures.[S3][S1][B2][B3]

This page explains the provisions and concepts reviewed, rather than a complete current consolidated text. For application, check the latest text, applicable flag requirements and company procedures.[S1][S3]

Questions

Is tactical diameter the distance around a complete circle?

No. It is the midship-point displacement perpendicular to the original course from the rudder order to a 180° heading change.

Do all large ships have the same stopping distance?

No. Consult the ship’s own test data and test conditions.

Does MSC.137(76) guarantee manoeuvring performance in all conditions?

No. It is a recommendatory manoeuvring standard; assess actual performance using the ship’s own test data, loading condition and environmental conditions.

Sources