Cargo · Aromatics
Benzene bulk shipping notes
Benzene is a carcinogenic, low-flash-point aromatic cargo; control vapour and skin exposure and use a benzene-specific measurement method. Before loading, check cargo safety information and exposure controls against the latest flag, competent authority and shipboard requirements.
Properties and data scope
| Property | Value or scope | Unit | Tag and source |
|---|---|---|---|
| CAS number | 71-43-2 | — | Disclosed[S1] |
| Closed-cup flash point | −11 | °C | Disclosed[S1] |
| Boiling point | 80 | °C | Disclosed[S1] |
| Melting point | 6 | °C | Disclosed[S1] |
| Relative density (water = 1) | 0.88 | — | Disclosed[S1] |
| Water solubility (25°C) | 0.18 | g/100 ml | Disclosed[S1] |
| Explosive limits in air | 1.2–8.0 | % vol | Disclosed[S1] |
Documents and suitability
MSC/Circ.1095 is a historical circular; its original text does not establish its current status or applicability to every vessel. Check pre-loading cargo safety information, exposure controls and applicable limits against the latest flag, competent authority and shipboard requirements.[S8]
The MEPC.318(74) Chapter 17 entry “Benzene and mixtures having 10% benzene or more (i)” lists Y in column c, ship type 3 in e, tank type 2G (integral gravity) in f, and 15.12, 15.17, 15.19.6 and 16.2.9 in o. Check applicable amendments and the vessel’s Certificate of Fitness before carriage.[S5]
Handling and work after discharge
ICSC calls for closed systems, ventilation, explosion-proof equipment and prevention of electrostatic build-up. Do not use compressed air for filling or discharging. Control residual vapour and skin contact after discharge.[S1]
A general combustible-gas reading does not establish acceptable benzene exposure. PID screens volatile organic compounds; quantify benzene with a specific tube or another suitable method. Before entry, test oxygen, flammable gas and target toxic gases.[S2][S3]
Compatibility and health hazards
Benzene reacts violently with oxidants, nitric acid, sulfuric acid and halogens and attacks plastics and rubber. Check cargo-contact materials and prevent incompatible contamination.[S1]
Benzene can enter the body by inhalation, skin absorption and ingestion; prolonged or repeated exposure can affect bone marrow. Odour is not a reliable exposure warning.[S1]
ACGIH’s 2024 update set the benzene TLV-TWA at 0.02 ppm and withdrew the STEL, as confirmed by Newfoundland and Labrador’s occupational health and safety authority. This is ACGIH occupational exposure guidance, not an amendment to MSC/Circ.1095 or a limit uniformly adopted by all flag Administrations or competent authorities.[S6][S7]
Questions
What is the closed-cup flash point of benzene?
ICSC 0015 reports −11°C and a boiling point of 80°C.
Does a zero combustible-gas reading rule out benzene exposure?
No. General combustible-gas detection does not replace low-level benzene measurement.
How should controls for benzene-containing cargoes be determined?
Check actual cargo safety information and the latest flag, competent authority and shipboard requirements; a historical circular alone does not establish current applicability.
Is benzene compatible with sulfuric acid?
ICSC identifies a violent reaction. Prevent mixing and check applicable segregation requirements separately.
Sources
- [S1]ILO/WHO ICSC 0015: Benzene
- [S2]Hydrogen sulfide and benzene
- [S3]Gas detection methods
- [S4]IBC ship types and tank location
- [S5]IMO MEPC.318(74): IBC Chapter 17 benzene entry
- [S6]ACGIH: benzene TLV-TWA
- [S7]Newfoundland and Labrador: ACGIH benzene limit changes (2024)
- [S8]IMO MSC/Circ.1095 original text: minimum safety standards for bulk liquids containing benzene