MARPOL Annex I discharge criteria checker

Enter location, en-route status, oil discharge rate, cumulative oil discharged, total particular cargo quantity and equipment status to check the six cargo-area conditions in Reg 34.1.

Cargo-area inputs

Synthetic data

Enter oil content and total oil discharged, not the oily mixture volume; use the total quantity of the particular cargo that produced the residue.

Check results

Overall six-condition check: Pass

Total limit: 3 m³ (1/30000)

Oil already discharged: 2 m³

Checks only Reg 34.1 cargo-area conditions; Reg 15 machinery-space bilge water at 15 ppm, Arctic waters and other area rules are not calculated.

Condition-by-condition check

ConditionReferenceResult
Outside a special areaReg 34.1.1Pass
More than 50 nm from nearest landReg 34.1.2Pass
Proceeding en routeReg 34.1.3Pass
Instantaneous oil discharge rate ≤ 30 L/nmReg 34.1.4Pass
Total oil discharged within the cargo limitReg 34.1.5Pass
ODME and slop tank arrangement operatingReg 34.1.6Pass

How to use it

  1. 1

    Confirm location and en-route status

    Check that the tanker is outside a special area, more than 50 nautical miles from nearest land and proceeding en route (Reg 34.1.1–3).

  2. 2

    Enter oil discharge data

    Enter instantaneous oil discharge rate in L/nm and total oil discharged this voyage in m³, not the total oily mixture volume; the rate must not exceed 30 L/nm (Reg 34.1.4).

  3. 3

    Calculate the particular cargo limit

    Use the total quantity of the particular cargo that produced the residue; apply 1/30000 for delivery after 31 December 1979, or 1/15000 for delivery on or before that date (Reg 34.1.5).

  4. 4

    Confirm equipment and review each condition

    The ODME and required slop tank arrangement must be operating (Reg 34.1.6); the overall check passes only when all six conditions pass.

Scope

  • Not a substitute for the ship's procedures and Oil Record Book; the result checks entered Reg 34.1 conditions and does not authorize discharge.
  • Arctic waters and other area rules are not modelled; the tool does not determine areas from coordinates.
  • Clean and segregated ballast are outside Reg 34.1; see Reg 34.2.
  • Machinery-space bilge water falls under Reg 15 and related provisions; its 15 ppm condition is not calculated here.
  • Check the current consolidated text and ship-specific requirements; this tool does not assess arrangements for tankers below 150 gross tonnage or other exceptions.

Worked example

Synthetic dataOutside a special area, en route, 60 nm from nearest land, delivered after 31 December 1979
Instantaneous oil discharge rate
25 L/nm
Oil discharged this voyage
2 m³
Total particular cargo quantity
90,000 m³
ODME and slop tank arrangement
Both operating
Six-condition check
All pass
Total limit (90,000 / 30,000)
3.000000 m³

All inputs are synthetic data; a pass covers only the six entered conditions and does not authorize actual discharge.

Questions

Does exactly 50 nautical miles from nearest land pass?

No. Reg 34.1.2 requires more than 50 nautical miles.

What about exactly 30 L/nm?

That condition passes because the limit is at most 30 L/nm; the other five conditions must also pass.

Which cargo quantity determines the total limit?

Use the total quantity of the particular cargo that produced the residue, not all cargo aboard or the oily mixture volume; enter both quantities in m³.

Can I check machinery-space discharge at 15 ppm?

No. This tool handles only Reg 34.1 cargo-area conditions; check machinery-space bilge water separately under Reg 15 and other applicable provisions.

Sources