Guide · Oil pollution

MARPOL Annex I oil discharge criteria

Updated 2026-10-08 · About 8 min read

In one sentence

Machinery bilge discharge requires the ship to be en route and treated, undiluted effluent at no more than 15 ppm; ordinary cargo-area discharge also requires location, oil-rate, quantity and operating ODME/slop-tank conditions to be met together.

Machinery spaces: Regulation 15

CheckCriterionTag and source
ScopeThese are ordinary criteria for ships of at least 400 GT; smaller ships follow regulation 15.6.Disclosed[S1]
Voyage statusShip proceeding en route.Disclosed[S1]
Treatment and concentrationRegulation 14 oil filtering equipment; undiluted effluent at or below 15 ppm. Special areas require regulation 14.7 equipment.Disclosed[S1]
Source segregationNeither cargo pump-room bilge water nor a mixture with oil cargo residues.Disclosed[S1]
Antarctic areaOil and oily mixture discharge is prohibited from any ship.Disclosed[S1]

Cargo area: Regulation 34

CheckRequired togetherTag and source
LocationOutside a special area and more than 50 nautical miles from nearest land; exactly 50 does not qualify.Disclosed[S1]
Voyage and rateProceeding en route, with instantaneous oil-content discharge at no more than 30 litres per nautical mile.Disclosed[S1]
Total quantityTankers delivered on or before 31 December 1979 as defined in regulation 1.28.1: 1/15,000 of the particular cargo; later tankers as defined in 1.28.2: 1/30,000. Determine the category under those definitions.Disclosed[S1]
EquipmentOperating slop-tank arrangement and oil discharge monitoring and control system as required by regulations 29 and 31.Disclosed[S1]

Quantity example: synthetic data

Synthetic dataIllustrating the 1/30,000 ratio only
Assumed particular cargo volume
30,000 m³
Applicable ratio
1/30,000
Oil-content quantity limit
30,000 / 30,000 = 1 m³ = 1,000 L

The cargo quantity is synthetic. The limit concerns oil content, not oily-water volume. Cumulative oil discharge must stay within it and all other criteria still apply.

Try a calculation

Enter NOR, working times, and exceptions to estimate demurrage or despatch.

Open laytime calculator →

Special areas and scope

  • Annex I designates the Mediterranean, Baltic, Black and Red Seas, the Gulfs area, Gulf of Aden, Antarctic area, North West European waters, Oman area of the Arabian Sea and Southern South African waters. Designation and application dates can differ.[S2]
  • MEPC.381(80) sets 1 January 2025 as the application date for Annex I discharge requirements in regulations 15.3, 15.5 and 34.3–34.5 in the Red Sea and Gulf of Aden special areas.[S3]
  • Clean or segregated ballast has separate exceptions. Cargo-area controls for tankers below 150 GT differ, so the ordinary ODME pathway cannot simply be assumed.[S1]
  • Retain non-compliant residues for reception facilities. Dilution or added chemicals must not be used to evade discharge criteria.[S1]

Questions

Can dilution be used to meet 15 ppm?

No. Regulation 15 requires undiluted effluent to contain no more than 15 ppm oil.

Does 1/30,000 limit the whole oily-water volume?

No. It limits discharged oil content relative to the total quantity of the particular cargo from which the residue arose.

Are both bilge and cargo-area discharges prohibited in special areas?

Ordinary special areas retain the machinery-space pathway in regulation 15.3 but prohibit oily cargo-area discharge under regulation 34. The Antarctic area prohibits oil and oily mixtures from all ships.

Sources