Ship squat estimator
Estimate maximum squat and remaining UKC using S_max = K × Cb × V² / 100 metres. Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.
Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.
Estimate
- Maximum squat S_max (m)
- 0.80
- H/T
- 1.20
- Remaining UKC (m)
- 1.20
- K
- 1
Warning bands are screening prompts, not universal safe limits; fixed K does not model actual blockage.
How to use it
- 1
Enter ship and depth data
Enter Cb, static draft T and water depth H; use metres for draft and depth, with depth greater than draft.
- 2
Use speed through water
Enter V in knots; the open-water approximation is Cb × V² / 100 metres.
- 3
Choose a fixed-K mode
This tool uses K = 1 for open mode and K = 2 for confined mode. Svetak (2001) presents the confined approximation 2 × Cb × V² / 100 metres for blockage factors of 0.100–0.265. The fixed setting does not calculate actual blockage and cannot establish applicability to every channel.
- 4
Review squat and clearance
H/T = water depth / static draft; remaining UKC = H − T − S_max. Review warnings against ship and waterway data.
Scope
- Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.
- Fixed K is a simplified setting; Barrass empirical equations have different constraints, and two coefficient settings cannot replace actual channel geometry and ship data.
- The tool’s Cb, H/T and speed prompts are for screening only; they do not establish a validated range, equation validity or a safety threshold for the fixed-K approximation. Assess against vessel data, actual channel conditions and local requirements.
- UKC deducts only estimated squat and excludes waves, heel, trim corrections and depth uncertainty; assess actual clearance using local methods.
Worked example
- Fixed K
- 1
- Maximum squat
- 0.80 m
- Depth-to-draft ratio H/T
- 1.20
- Static under-keel clearance
- 2.00 m
- Remaining UKC
- 1.20 m
All inputs are synthetic data. The same inputs in confined mode give squat of 1.60 m and remaining UKC of 0.40 m.
Questions
Is V speed over ground or through water?
This tool uses speed through water in knots.
Does confined mode represent every channel?
No. K = 2 is a fixed tool setting; actual blockage ratio, depth effects and channel geometry are not solved.
Why does the tool show a result with warnings?
Warnings are screening prompts while the inputs remain calculable; a zero or negative UKC explicitly warns that squat reaches or exceeds static clearance.
Can remaining UKC be used directly for ship handling?
No. The result deducts only simplified estimated squat; follow ship data, pilot advice and local assessment methods.