Guide · Tank cleaning

Switching from oil to chemicals: when a tank is clean enough for Annex II cargo

Updated 2026-10-08 · About 7 min read

In one sentence

An oil/chemical tanker must meet the next cargo’s agreed tank acceptance criteria and classify each washwater stream from the previous residues and approved ship documents; an Annex II next cargo does not automatically change oily-water controls.

Plan cleaning from the next cargo’s requirements

  1. 1

    Set acceptance criteria and washwater destinations

    Plan from previous and next cargoes, coating and acceptance requirements. Establish capacity and disposal or reception arrangements for oily and later cleaning-water streams.[B1][B2]

  2. 2

    Remove oil by water washing

    Collect oily washwater in slop tanks. Any decanting after settling still needs Annex I checks; do not directly discharge the washing stream.[B1]

  3. 3

    Assess before using cleaning agents

    Confirm residues and tank condition under the ship’s procedure before selecting cleaning agents and classifying subsequent water; absence of visible oil is not the complete assessment.[B1]

  4. 4

    Rinse and test for acceptance

    Rinse with fresh water where required. Complete entry precautions before inspection or sampling inside the tank. Assess against agreed tests and repeat cleaning and testing if needed.[B1][B2]

Make three separate decisions

DecisionBasisTag and source
Acceptance for the next cargoAgreed cargo acceptance and testing criteria, not merely the planned washing duration.Disclosed[B1]
Crew entryVentilation, atmosphere tests, entry permit, external attendance and rescue readiness.Disclosed[B1][B2]
Washwater dischargePrevious residues, cleaning medium, approved ship documents and all applicable annex conditions.Disclosed[B1]

What wall wash testing checks

  • WWT means wall wash testing, using sample results to assess residual contamination; examples include a permanganate time test. Test selection and acceptance values come from the next cargo's agreed specification.[B1]

Avoid misclassifying washwater

  • The Annex I clean-ballast definition is not a universal oil-to-chemical transition rule, and the next cargo’s name is not a classification trigger.[B1]
  • Do not arbitrarily mix oily water with cleaning-agent water intended for separate handling; establish whether later water falls under Annex II from its residues and approved documents.[B1]
  • Record the oily cleaning and disposal stage in Oil Record Book Part II; record other operations under the ship’s requirements so inspection results correspond to the water’s destination.[B1]

Questions

Does completing a washing duration establish acceptance?

No. Planned duration is not an acceptance result; the next cargo’s agreed inspection and testing criteria must be met.

Does no visible oil automatically make rinse water Annex II water?

No. Residues, cleaning medium, approved ship documents and applicable requirements still determine classification and disposal.

Does a passed WWT allow unrestricted entry?

No. Cargo acceptance and entry safety are separate decisions; entry still requires the permit and atmosphere precautions.

Sources